One of the worst things a homeowner may experience

One of the worst things a homeowner may experience is a basement that constantly leaks with every rain or snow melt or a basement that is flooded.

How Big Should My Sump Hole Be?

To allow space for the pump and the piping as well as the water storage between pumping, sump pits should be about 2 feet in diameter. One way is when the water enters via the perimeter drains of the basement waterproofing system and funnels into the pit. Metal can also be used in it's construction. Another way is when the basement is below the water table level and water leaks into the basement. Some contain a float switch to turn the pump on when needed. This is determined by the area of drainage that is connected to the sumps as well as the depth of the basement, groundwater and other factors. Sump pumps are handy devices that help you maintain the value of your home. The water gets pumped either outdoors, away from the foundation of the house, or into the main water drainage system of the house. When the water reaches a certain height, the switch turns on to activate the pump. What Is A Sump Pump?

A sump pump is a pump that is used to remove water that has accumulated in the sump pit, usually in the lowest part of the basement or cellar. There are two types of sump pump; one type is submersible while the other type is Semi-Hermetic Industrial Chiller called a pedestal.. To keep the basement from getting flooded, the water is diverted into the hole and moved out by the sump pump.

* A submersible pump is about 12 inches tall and is placed completely inside the tank inside the bottom of the pit. Be sure to place 3 to 4 inches of course gravel should be placed in the bottom of the pit when installing the liner.

Submersible pumps are located on the bottom of the units and the water is sucked up through the bottom.

How Do Sump Pumps Work?

While the water fills up the sump pit, the sump pump starts up, and pumps the water out of the basement.

What Size Of Sump Pump Do I Need For My Home?

Actually, houses have more of a horsepower requirement for a sump pump instead of a size requirement. The more water that is expected to accumulate in the sump pit, the more horsepower is required to move it.

Should I Use A Liner For My Pit?

It is advisable to use a liner when constructing a pit for your sump pump and plastic is a preferable material. Since the motor of this type of pumps is not designed for underwater use, the switch will activate the pump before the water reaches the bottom of the pumps motor.

* A pedestal pump is mounted on a small pedestal and stands about 30 inches tall. This water can accumulate in two ways. This type of pump also comes with a grate or screen over the face of it to keep any debris from getting into the impeller, which could clog the pump. Not only do they protect your belongings and your foundation from water damage, but they also save you thousands of dollars in water damage repairs. The motor of this pump has a pipe that extends to the bottom of the pit and it too has a float switch to activate the pump. This switch is electrical and encased in a hard plastic bubble and floats when the water rises. One of the ways to prevent this from happening is with a sump pump